DDR 266 ECC/Registered DIMM
-Power supply: VDD: 2.5V ± 0.1V, VDDQ: 2.5V ± 0.1V
-Max clock Freq: 266MHz.
-Double-data-rate architecture; two data transfers per clock cycle
-Differential clock inputs (CK and /CK)
-Burst Mode Operation.
-Auto and Self Refresh.
-Data I/O transactions on both edge of data strobe.
-Edge aligned data output, center aligned data Input.
-Serial Presence Detect (SPD) with serial EEPROM
-SSTL_2 compatible inputs and outputs.
-MRS cycle with address key programs.
-CAS Latency (Access from column address): 2.5
-Burst Length (2, 4, 8)
-Data Sequence (Sequential & Interleave)
Description
The IRVINE DDR266 ECC/Registered DIMM is a Double Data Rate SDRAM high-density module for server and workstation. It consists of 18pcs CMOS Double Data Rate SDRAMs in 66 pin TSOP-II 400mil packages, 2pcs drive ICs for input control signal, 1pcs PLL, and a 2048 bits serial EEPROM on a 184-pin printed circuit board.
The DDR266 ECC/Registered DIMM is a dual in-line memory module and is intended for mounting into 184-pin edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.
The DDR266 is offered in quantities in 256MB up to 1GB capacities.
